CamperFilter Activated Carbon System Set + ClingCup Suction Mount
The sediment filter removes larger impurities such as sand, algae, rust and coarse dirt from the water.
Mesh size: 0.15 mm / 100 mesh.
Activated carbon filter:
Activated carbon filters chlorine, heavy metals, dyes, hormone and pharmaceutical residues, PFAS (polyfluorinated chemicals), organic hydrocarbons, microplastics, pesticides, herbicides, fungicides, bacteria, germs, as well as substances that impair odour and taste from the water.
It does not remove minerals such as magnesium, calcium or potassium, nor trace elements.
-
Activated carbon made from coconut shell
-
Iodine number > 1000 mg/g; activated carbon with a high iodine number can absorb more contaminants than one with a lower iodine number
-
BET surface area: 1050 m²/g; BET measurement refers to an analytical method used to determine surface area, particularly of porous solids, by gas adsorption
-
Effective particle size: 1.0 mm; main particle diameter: 1.4 mm
-
Also includes a fine filter that removes contaminants down to 10 microns in size
Special filter holder (ClingCup) for securely attaching the filter system to vehicle walls with textured surfaces such as hammer-finish paint or Raptor coating.
After use, simply drain the system and hang it on the inside wall of the motorhome garage.
Scope of delivery:
-
Filter cartridge with 3/4" screw cap, transparent plastic
-
Filter insert with plastic mesh (mesh size: 0.15 mm / 100 mesh), washable up to max. 60 °C
-
Filter cartridge with activated carbon
-
Hose connector with 3/4" thread, for 1/2" hose
-
Drinking water hose with 2 hose connectors and 1 hose coupler
-
Dosing tap
-
2 end caps for hose connector
-
ClingCup filter holder, 2-piece, for smooth surfaces (1 suction mount, 1 cartridge holder, pre-assembled)
Before each use, briefly flush the activated carbon filter.
Replace the filter after 3–4 months even with infrequent use.
Weight: 0.185 kg
Dimensions (L × W × H): 220 × 90 × 90 mm
Filter insert washable up to max. 60 °C
Compatible with hose systems with 1/2" connections.
Important information:
When using the filter system, especially with the activated carbon filter, the flow rate may be reduced. The fine structure of the activated carbon, which ensures thorough filtration, restricts water flow. The inlet pressure also plays a role – check the supply hose if necessary (e.g. long or narrow hoses). Water outlets at campsites do not always provide optimal water pressure. Ensure correct flow direction and vertical installation to prevent air bubbles. With prolonged use, the activated carbon may become saturated – replacing the filter is then recommended, even if no immediate change in water quality is noticeable.
Any further questions? We are happy to help: info@camperstation.de
