CamperFilter replacement cartridge activated charcoal filterActivated carbon filter: For precise filtration. Activated carbon filters chlorine, heavy metals, dyes, hormone and drug residues, PFAS (polyfluorinated chemicals), organic hydrocarbons, microplastics, pesticides, herbicides, fungicides, bacteria, germs and odour and taste-disturbing substances from the water, but not minerals such as magnesium,potassium orpotassium and traceelements. - activated carbon from coconut shell- iodine value > 1000 mg/g; activated carbon with a high iodine value can absorb more pollutants than activated carbon with a lower iodine value. -BET surface area 1050 m2/g; the BET measurement is a term for an analytical method for determining the size of surfaces, especially porous solids, by means of gas adsorption - Effective particle size: 1.0 mm; main particle diameter: 1.4 mmAlso contains a micro-fine filter.We recommend replacing the activated carbon filter after approx. 3-4 months from the first use.Weight (kg) approx. 0.93, Cartridge dimensions (L × W × H) (mm) 120 x 50 x 50, Compatible with hose systems with 1/2" connections.Scope of delivery:- 3 filter cartridge with screw cap and activated carbon, encapsulated. Do not open encapsulation, contents sharp-edged. What you should know:When using the filter system, especially with activated carbon filters, the flow rate may decrease. This is due to the fine structure of the activated carbon, which ensures thorough filtration but reduces the water flow rate. The inlet pressure also plays a role - and if necessary, check the inlet hose (e.g. for long or thin pipes). Tapping points on campsites do not always offer the optimum water pressure. Ensure the correct flow direction and vertical installation to avoid air bubbles. With prolonged use, the activated carbon may become saturated - a filter change is then advisable, even if this is not directly reflected in the condition of the water.Further questions? We are happy to help: info@camperstation.de

CamperFilter Activated Carbon MaxiSet and ClingCupFilter set with sediment filter and activated carbon filter, plus digital water meter, drinking water hose, and ClingCup suction holder. The sediment filter removes larger impurities such as sand, algae, rust, and coarse dirt from the water. Activated carbon filter: Activated carbon filters chlorine, heavy metals, dyes, hormone and drug residues, PFAS (polyfluorinated chemicals), organic hydrocarbons, microplastics, pesticides, herbicides, fungicides, as well as substances that impair odor and taste from the water. It does not remove minerals such as magnesium, calcium, or potassium, or trace elements.- Activated carbon made from coconut shells - Iodine value > 1000 mg/g; activated carbon with a high iodine value can absorb more contaminants than carbon with a lower iodine value. - BET surface area 1050 m²/g; BET measurement is a term for an analytical method used to determine the size of surfaces, especially porous solids, using gas adsorption. - Effective particle size: 1.0 mm; main particle diameter: 1.4 mm. Additional fine filter, 10 micrometer size. We recommend replacing the activated carbon filter after approximately 3-4 months from first use. Special filter holder (ClingCup) for securely attaching the filter system to the vehicle wall with a textured surface such as "hammered" or Raptor paint. After use, simply empty the system and hang it on the inside wall of the RV garage. Digital water meter for monitoring the flow rate. LCD display up to 999.9 L, switchable between liters and gallons. Battery operated, single and total measurement, reset function. Drinking water hose for connecting the filter outlet to the water tank in the vehicle. Scope of delivery:- Filter cartridge with 3/4" screw cap, clear plastic - Filter insert, plastic mesh (mesh size: 0.15 mm/100 mesh), washable up to 60°C - Activated carbon filter cartridge, coconut shell - Hose connection 3/4" thread, for 1/2" hose - Dosing tap - 2 hose connection plugs - ClingCup filter holder, 2-piece, for textured surfaces (1 suction cup, 1 cartridge holder, pre-assembled) - Digital water meter - Drinking water hose with 2 hose connectors and 1 hose connector Rinse the activated carbon filter briefly before each use. Weight (kg) 0.650 Dimensions (L × W) (mm) 450 x 90 x 90 Sediment filter insert, washable up to 60°C Compatible with hose systems with 1/2" connections This should be noted Important information: When using the filter system, especially with an activated carbon filter, the flow rate may decrease. The fine structure of the activated carbon, which ensures thorough filtration, reduces the water flow. The inlet pressure also plays a role – and you may want to check the inlet hose (e.g., with long or thin pipes). Water taps at campsites don't always offer optimal water pressure. Ensure the correct flow direction and vertical installation to prevent air bubbles. With prolonged use, the activated carbon can become saturated – a filter change is then advisable, even if this isn't immediately apparent in the water's condition.Note regarding the accuracy of the water meter: The water meter is precise and reliable; however, system-related deviations can occur. These can be caused by, for example, air in the pipe system, fluctuating water pressure, unfavorable installation positions, or minor leaks. Under normal conditions, the deviation is typically less than 10%. The displayed values ​​are therefore for guidance only and do not replace a calibrated consumption measurement. Further questions? We are happy to help: info@camperstation.de

If it is no longer possible to clean the filter insert , it is not necessary to replace the entire cartridge.We offer filter inserts in sets of 4 for this purpose . The sediment filter removes larger impurities such as sand, algae, rust and coarse dirt from the water.Scope of delivery:- Filter insert for replacement in CamperFilter Filter cartridge with 3/4" screw cap, plastic- Filter insert plastic mesh (mesh size: 0.15 mm/100 mesh) For cartridge (L × W × H) (mm) 120 x 50 x 50, filter insert dimensions (L × W × H) (mm) 78 x 34 x 25, filter insert can be rinsed (not with hot water).

CamperFilter activated charcoal Practical.Filter set sediment filter and activated charcoal filter plus comfort suction holder.The sediment filter removes larger impurities such as sand, algae, rust and coarse dirt from the water. Mesh size: 0.15 mm/100 mesh Activated carbon filter: Activated carbon filters chlorine, heavy metals, dyes, hormone and drug residues, PFAS (polyfluorinated chemicals), organic hydrocarbons, microplastics, pesticides, herbicides, fungicides, bacteria, germs and odour- and taste-impairing substances from the water. However, it does not remove minerals such as magnesium, calcium or potassium and trace elements. - Activated carbon from coconut shell- Iodine value > 1000 mg/g; an activated carbon with a high iodine value can absorb more pollutants than one with a lower iodine value.- BET surface area 1050 m2/g; the BET measurement is a term for an analysis method for determining the size of surfaces, in particular porous solids, by means of gas adsorption. - Effective particle size: 1.0 mm; main particle diameter: 1.4 mm.Also contains a fine filter which filters contaminants up to 10 micrometres in size. We recommend replacing the activated carbon filter after approx. 3-4 months from the first use.Suction holder for conveniently attaching the filter system to the vehicle wall during the filling process. After use, simply pour out the system and hang it on the inside wall of the motorhome garage. Scope of delivery:- Filter cartridge with 3/4" screw cap, clear plastic- Filter insert plastic mesh (mesh size: 0.15 mm/100 mesh) washable max. 60°C.- Filter cartridge with activated carbon- Hose connection 3/4" thread, for 1/2" hose- Dosing tap- 2 caps for hose connection- Filter holder 2-piece (1 suction holder, 1 holder for cartridge)Rinse the activated charcoal filter briefly at the start of each use. Change the filter after 3-4 months, even if used infrequently.Weight (kg) 0.185 Dimensions (L × W x H) (mm) 220 x 85 x 50 Filter insert washable max. 60°C.Compatible with hose systems with 1/2" connections You should know this:When using the filter system, especially with activated charcoal filters, the flow rate may decrease. This is due to the fine structure of the activated carbon, which ensures thorough filtration but reduces the water flow rate. The inlet pressure also plays a role - and if necessary, check the inlet hose (e.g. for long or thin pipes). Tapping points on campsites do not always offer the optimum water pressure. Ensure the correct flow direction and vertical installation to avoid air bubbles. With prolonged use, the activated carbon may become saturated - a filter change is then advisable, even if this is not directly reflected in the condition of the water.Retaining ring may vary in colour between grey and black depending on the production line. Further questions? We are happy to help: info@camperstation.de

WAFA 3, water tank adapter, with 3-pin bayonet connectionFor convenient filling of fresh water tanks in motorhomes, using familiar quick coupling systems for 1/2 inch hoses (Gardena, etc.). Suitable for water tanks with and without overflow. Bayonet fitting with 3 spigots suitable for 68 mm lid diameter or tank filler openings with 55 mm diameter (see photos).Mostly used for panel van motorhomes, alcoves, semi-integrated, integrated and liners from all common manufacturers.Please compare the original tank opening shown with the number of pins and diameter before ordering. OR CONTACT US, WE WILL BE HAPPY TO HELP YOU. THERE ARE TWO SIZES.We stock the WAFA 3-Pinin 68 and 78 mm lid diameters.Tighten the adapter slightly with a short turn to the right.With short horizontal inlet channels, turbulence can occur when filling with high water pressure, which flushes the water out to the pressure openings. In this case, attach the short hose supplied to the outlet channel of the WAFA and insert it into the tank. The pressure openings on the WAFA enable pressure equalisation for water tanks without overflow. When the water tank is full, excess water runs out of the openings.In-house development, manufactured in Germany.Material:Adapter: PET, UV-resistant and suitable for foodstuffs (drinking water). Recyclable plastic. Additional hose: UV-resistant and food-safe. Seals: PET.Protect from heat above 60°C, do not treat with hot water. Slight deviations in colour or surface structure possible, no impairment of function, additive manufacturing.Regulation (EU) No. 10/2011 of the European Commission on plastic materials and articles intended to come into contact with food (Europe). Approval by the (FDA) Food and Drug Aministration (USA)Scope of delivery:1 WAFA water filling adapter, 1 hose for insertion into the water filler neck, 1 original Gardena O-ring (fitted). Opening inside Ø 55 mm, 1spacer ring seal (hose coupling shown is not included in the scope of delivery, 2 spacer ring seals only for WAFA3A for 78 mm lid diameter).

For independent operation of the WaterBob:If there is no 12 volt connection for operating the WaterBob nearby, you can simply operate the WaterBob with a standard tool battery. For this purpose, we have developed an adapter that makes contact with the tool battery: "Parkside 12V battery 2Ah Papk 12 A4" . ATTENTION: The adapter is only designed for use with the battery mentioned!Simply insert the battery into the adapter and connect the adapter connection to the plug on the WaterBob. To switch on, press the toggle switch on the adapter.Technical data:Material: PCTG, fire-retardant according to UL94V2Voltage transmission max. 12 voltsLength: 110 mmDiameter: 50 mmScope of delivery:Adapter for inserting the specified battery model with on/off rocker switch, plug connection to the WaterBob.The battery shown is not included in the scope of delivery. Note:"Why don't we develop a rechargeable battery ourselves?"The development and production is extremely complex and would hardly be realisable at an acceptable price for the battery and charger. There is also the ecological aspect: why use additional resources when alternatives have already been developed and produced?Our decision to design the adapter on the basis of the battery mentioned here is based solely on the practicality and compactness of the battery.We expressly point out that there are no commercial or legal links between us and the manufacturer or distributor of the battery mentioned and that this does not constitute a recommendation to buy the battery.We accept no liability for any damage that may result from the operation of the battery mentioned. The adapter and the battery in combination can only be used in the manner intended here for the purpose stated here. The maximum voltage (12 volts) must not be exceeded.

Watering cans are a thing of the past!Waterbob, rollable water tank (25 litres) with built-in 12 V pump, connection cable and drinking water hose, for filling the water tank in the motorhome or caravan on the pitch. Filling can be done conveniently with our optional WAFA tank adapter.Water tank and water hose suitable for drinking water.Waterbob in 2 power levels and 2 variants.The Waterbob saves space in the motorhome, also suitable for Eurobox on pull-outs.

WAFA+ Water filling adapter & tank capWAFA+ is a filling adapter and tank cap in one and replaces the original tank cap on the fresh water tank.The service flap can be closed effortlessly. For convenient filling of fresh water tanks in motorhomes with the aid of familiar quick coupling systems for 1/2 inch hoses. Suitable for water tanks with functioning ventilation and overflow.Screw cap with either coarsethread or fine thread suitable for: Knaus, Weinsberg, Bürstner, Chausson, Challenger, Ahorn SlimPlease check the thread type before ordering or send a photo of the fuel filler cap.A smaller WAFA is required for caravans, this is also available from us.OR ASK US, WE WILL BE HAPPY TO HELP YOU.How it works:The built-in valve closes the return flow from the tank after filling and seals the tank cap. This prevents water from escaping from the water tank. The dust cap supplied prevents dirt from entering the WAFA+ Application:1. unscrew the original tank cap2. place the ring of the dust cap around the threaded connection on the tank3. screw on the WAFA+ (Caution: do not screw in the tank thread at an angle)4. attach the hose with hose coupling (Gardena, etc.) and fill the water tank5. pull off the hose coupling and leave the WAFA+ on the tank as a cap6. put on the dust protection cap7. close the flap, ready (fits every service flap)8. everything stays clean and dry! Safety note:Only use with an existing and functioning overflow/fuelling vent.WAFA+ filling adapter does not switch off automatically when the water tank is full. Do not carry out the filling process unattended. Switch off the water at the latest when the tank vent overflows. Close the inspection cover of the water tank (red) tightly before filling. The WAFA+ filling adapter is only to be used for drinking water.In-house development, manufactured in Germany. Scope of delivery:1 c-water tank cap with adapter (for Gardena, etc.) and integrated backflow stop,1 dust protection cap, 1 original Gardena O-ring (fitted). (Hose coupling shown is not included in the scope of delivery).Material:Adapter: PET, UV-resistant and suitable for foodstuffs (drinking water). Recyclable plastic.Silicone seal food-safe, Gardena rubber ring, brass pin, stainless steel spring, dust capProtect from heat above 60°. Not suitable for dishwasher. Do not place in hot areas (heating pipe outlet etc.).Regulation (EU) No. 10/2011 of the European Commission on plastic materials and articles intended to come into contact with food (Europe). Approval of the (FDA) Food and Drug Aministration (USA).Slight colour deviations from illustration possible.

Where do you put the water hose after use? It usually ends up in the tool shed, cellar, garage or motorhome. Dirt and insects get in and the hose needs to be rinsed before it can be used again. Hose adapters or hose couplings also need to be rinsed thoroughly to ensure they remain tight.The HoseCap puts an end to this. To use the HoseCap, simply push the hose through the hose eyelet so that it does not get lost. After using the water hose, attach the HoseCap to the hose coupling. This keeps the water hose closed and clean inside. The HoseCap is available in a 3-pack, orange.Package contents: 3 HoseCaps.Set price 3 pieces HoseCap € 9.90The hose coupling shown is not included in the scope of delivery.Material PET, UV-resistant, food-safe (drinking water), recyclable plastic, protect from heat above 60°C, do not treat with boiling water. Slight variations in colour or surface structure possible, no impairment of function.

For convenient filling of fresh water tanks in motorhomes using standard quick-connect systems for 1/2 inch hoses. Suitable for water tanks with and without overflow. Bayonet lock with 2 pins suitable for: Mobilvetta, Challenger, Roller-Team, Benimar, Forster, Hymer, Laika and many more. Developed and manufactured in Germany. Scope of delivery: 1 WAFA water filling adapter, 1 hose for insertion into the water filler neck, 1 original Gardena O-ring (fitted) . Cover Ø 39 mm (hose coupling shown above is not included in delivery). With short horizontal inlet channels, high water pressure during filling can cause turbulence, which flushes the water out of the pressure openings. In this case, attach the short hose supplied to the outlet channel of the WAFA and insert it into the tank. The pressure openings on the WAFA allow pressure equalisation in water tanks without overflow. When the water tank is full, excess water flows out of the openings. Safety note: The WAFA filling adapter does not switch off automatically when the water tank is full. Do not leave the filling process unattended. If water overflows from the pressure openings, turn off the water supply. Do not close the pressure openings. Close the inspection cover of the water tank (red) tightly before filling. The filling adapter is only to be used for drinking water.

CamperFilter Sediment Basic Filter SetThe basis of the CamperFilter system.The sediment filter removes larger impurities such as sand, algae, rust and coarse dirt from the water.Scope of delivery:- Filter cartridge with 3/4" screw cap, clear plastic- Plastic mesh filter insert (mesh size: 0.15 mm/100 mesh)- Hose connection 3/4" thread, for 1/2" hose- Dosing tap- 2 caps for hose connectionWeight (kg) 0.180Dimensions (L × W × H) (mm) 260 x 60 x 50Filter insert can be rinsed (not with hot water)Compatible with hose systems with 1/2" connections. And here also with activated carbon.

WAFA+ 6 for WOHNWAGEN, 50 mm tank opening.WAFA+6 is a filling adapter and tank cap in one and replaces the original tank cap on the fresh water tank of Knaus and Weinsberg camper vans with a 50 mm diameter filler neck.Please note the size of the original filler cap when ordering. For motorhomes (60 mm) we offer the WAFA+ 7.For convenient filling of fresh water tanks in caravans, with the aid of known hose coupling systems for 1/2" inch hoses (Gardena, etc.). Application: Unscrew the original tank capPlace the ring of the dust protection cap around the threaded connection on the tankScrew on the WAFA+ (note: do not screw in the tank thread at an angle)Place the hose with hose coupling (Gardena, etc.) on the brass coupling and screw in the water.) onto the brass coupling and fill the water tankPull off the hose coupling and leave the WAFA+ on the tank as a capPut on the dust cap,Close the service flap, finishedAfter filling, the built-in valve closes the return flow from the tank and seals the tank cap. This prevents water from escaping from the water tank. The dust cap supplied prevents dirt from entering the WAFA+.Scope of delivery:1 WAFA+ water tank lid with adapter (for Gardena, etc.) and integrated return stop, 1 dust cap, 1 O-ring (fitted). (The hose coupling (Gardena) shown is not included in the scope of delivery).Safety instructions:Only use when the overflow or tank venting system is functioning. WAFA+ filling adapter does not switch off automatically when the water tank is full. Do not carry out the filling process unattended. Switch off the water at the latest when the tank vent overflows. Close the inspection cover of the water tank tightly before filling.The WAFA+ filling adapter is only to be used for drinking water. In-house development, manufactured in Europe (Germany).Material: Adapter: PLA, compostable plastic (EU standard 13432). Silicone seal, Gardena rubber ring, brass pin, stainless steel spring, dust cap Protect from heat above 50°, do not use boiling water or dishwasher. Do not place on heating pipes or behind windows in direct sunlight. Slight variations in colour or surface structure possible, no impairment of function, additive manufacturing.

WAFA+ Water filling adapter & tank cap Now with brass adapterWAFA+ is a filling adapter and tank cap in one and replaces the original tank cap on the fresh water tank. For convenient filling of fresh water tanks in motorhomes, with the aid of familiar quick coupling systems for 1/2 inch hoses. Suitable for water tanks with a functioning overflow.Screw cap with Coarsethread Suitable for: Chausson, Challenger, Ahorn Slim How it works:The built-in valve closes the return flow from the tank after filling and seals the tank lid. This prevents water from escaping from the water tank. The dust cap supplied prevents dirt from entering the WAFA+ Application:1. unscrew the original tank cap2. place the ring of the dust cap around the threaded connection on the tank3. screw on the WAFA+ (Caution: do not screw in the tank thread at an angle)4. attach the hose with hose coupling (Gardena, etc.) and fill the water tank5. pull off the hose coupling and leave the WAFA+ on the tank as a cap6. put on the dust protection cap, swivel in the filler neck - done!7. Everything stays clean and dry! Safety instructions:Only use with an existing and functioning overflow/fuelling vent.WAFA+ filling adapter does not switch off automatically when the water tank is full. Do not carry out the filling process unattended. Switch off the water at the latest when the tank vent overflows. Close the inspection cover of the water tank (red) tightly before filling. The WAFA+ filling adapter is only to be used for drinking water.In-house development, manufactured in Germany.Scope of delivery:1 water tank lid with brass adapter (for Gardena, etc.) and integrated backflow stop,1 dust protection cap, 1 original Gardena O-ring (fitted).(Hose coupling shown is not included in the scope of delivery).Material:Adapter: PET, UV-resistant and suitable for foodstuffs (drinking water). Recyclable plastic. BrassSilicone seal food-safe, Gardena rubber ring, brass pin, stainless steel spring, dust capProtect from heat above 60°. Not suitable for dishwasher. Do not place in hot areas (heating pipe outlet etc.).Regulation (EU) No. 10/2011 of the European Commission on plastic materials and articles intended to come into contact with food (Europe). Approval of the (FDA) Food and Drug Aministration (USA).Slight colour deviations from illustration possible.

CamperFilter activated charcoal Practical filter set, sediment filter and activated charcoal filter plus water meter.The sediment filter removes larger impurities such as sand, algae, rust and coarse dirt from the water.Activated charcoal filter: For precise filtration. Activated carbon filters chlorine, heavy metals, dyes, hormone and drug residues, PFAS (polyfluorinated chemicals), organic hydrocarbons, microplastics, pesticides, herbicides, fungicides, bacteria, germs and odour- and taste-impairing substances from the water. However, it does not remove minerals such as magnesium, calcium or potassium and trace elements.- Activated carbon from coconut shell- Iodine number > 1000 mg/g; an activated carbon with a high iodine number can absorb more pollutants than one with a lower iodine number.- BET surface area 1050 m2/g; BET measurement is a term for an analytical method for determining the size of surfaces, especially porous solids, by means of gas adsorption.- Effective particle size: 1,050 m2/g. Effective particle size: 1.0 mm; main particle diameter: 1.4 mm.Also contains a fine filter which filters out dirt up to 10 micrometres in size.We recommend replacing the activated carbon filter after approx. 3-4 months from the first use. With digital water meter for checking the fill level or the amount of water transferred.Holder for conveniently attaching the filter system to the vehicle wall during filling. After use, simply pour out the system and hang it on the inside wall of the motorhome garage. Scope of delivery:- Filter cartridge with 3/4" screw cap, clear plastic- Plastic mesh filter insert (mesh size: 0.15 mm/100 mesh) washable max. 60°C.- Filter cartridge with activated carbon (replace after 3-4 months)- Hose connection 3/4" thread, for 1/2" hose- Dosing tap- 2 caps for hose connection- Filter holder, 2 parts (1 suction holder, 1 holder for cartridge)- 1 digital water meterRinse the activated charcoal filter before first use. Change the filter after 3-4 months, even if used infrequently.Weight (kg) 0.185 Dimensions (L × W) (mm) 220 x 85 x 50.Filter insert washable max. 60°C.Compatible with hose systems with 1/2" connections. You should know this: When using the filter system, especially with activated carbon filter, the flow rate may decrease. This is due to the fine structure of the activated carbon, which ensures thorough filtration but reduces the water flow rate. The inlet pressure also plays a role - and if necessary, check the inlet hose (e.g. for long or thin pipes). Tapping points on campsites do not always offer the optimum water pressure. Ensure the correct flow direction and vertical installation to avoid air bubbles. The activated carbon may become saturated after prolonged use - a filter change is then advisable, even if this is not directly reflected in the condition of the water. Note on the accuracy of our water meters:Our water meters are precise and reliable, but deviations may occur due to the system. This can be caused, for example, by air in the pipe system, fluctuating water pressure, unfavourable installation positions or minimal leaks. Under normal conditions, the deviation is typically less than 10 %. The values displayed therefore serve as a guide and do not replace a calibrated consumption measurement. Retaining ring may vary in colour between grey and black depending on the production line. Further questions? We are happy to help: info@camperstation.de

Holder for protective cap for gas cylinders (propane, aluminium gas) 3, 5, 6, 11 KG. 2-piece for cap and gas spanner.Possible for floor, wall or ceiling mounting. Fixing by gluing or screwing. Screws supplied: 2 stainless steel screws 4.5 x 30.Scope of delivery: 1holder for gas cap, 1 holder for gas spanner. 2 stainless steel screwsDeveloped and manufactured in-house in Europe (Germany). The gas cap and gas spanner shown are not included in the scope of delivery.

CamperFilter Activated Carbon System Set + ClingCup Suction Mount The sediment filter removes larger impurities such as sand, algae, rust and coarse dirt from the water. Mesh size: 0.15 mm / 100 mesh. Activated carbon filter: Activated carbon filters chlorine, heavy metals, dyes, hormone and pharmaceutical residues, PFAS (polyfluorinated chemicals), organic hydrocarbons, microplastics, pesticides, herbicides, fungicides, bacteria, germs, as well as substances that impair odour and taste from the water. It does not remove minerals such as magnesium, calcium or potassium, nor trace elements. Activated carbon made from coconut shell Iodine number > 1000 mg/g; activated carbon with a high iodine number can absorb more contaminants than one with a lower iodine number BET surface area: 1050 m²/g; BET measurement refers to an analytical method used to determine surface area, particularly of porous solids, by gas adsorption Effective particle size: 1.0 mm; main particle diameter: 1.4 mm Also includes a fine filter that removes contaminants down to 10 microns in size Special filter holder (ClingCup) for securely attaching the filter system to vehicle walls with textured surfaces such as hammer-finish paint or Raptor coating. After use, simply drain the system and hang it on the inside wall of the motorhome garage. Scope of delivery: Filter cartridge with 3/4" screw cap, transparent plastic Filter insert with plastic mesh (mesh size: 0.15 mm / 100 mesh), washable up to max. 60 °C Filter cartridge with activated carbon Hose connector with 3/4" thread, for 1/2" hose Drinking water hose with 2 hose connectors and 1 hose coupler Dosing tap 2 end caps for hose connector ClingCup filter holder, 2-piece, for smooth surfaces (1 suction mount, 1 cartridge holder, pre-assembled) Before each use, briefly flush the activated carbon filter. Replace the filter after 3–4 months even with infrequent use. Weight: 0.185 kg Dimensions (L × W × H): 220 × 90 × 90 mm Filter insert washable up to max. 60 °C Compatible with hose systems with 1/2" connections. Important information: When using the filter system, especially with the activated carbon filter, the flow rate may be reduced. The fine structure of the activated carbon, which ensures thorough filtration, restricts water flow. The inlet pressure also plays a role – check the supply hose if necessary (e.g. long or narrow hoses). Water outlets at campsites do not always provide optimal water pressure. Ensure correct flow direction and vertical installation to prevent air bubbles. With prolonged use, the activated carbon may become saturated – replacing the filter is then recommended, even if no immediate change in water quality is noticeable. Any further questions? We are happy to help: info@camperstation.de

Filter holder2-part filter holder, consisting of suction holder and retaining ring, for attaching the camper filter set to the vehicle wall.The surface should be clean and even. "Hammered" exterior walls, as used in some caravans, are not very suitable for this.Already included in corresponding filter sets, if listed in "Scope of delivery".Retaining ring may vary in colour between grey and black depending on the production line.

MultiShower with hose and 2 hose connections. On/off switch with lock.Adjustment of the spray intensity.9-way adjustable spray jet.Connection suitable for WaterBob and is therefore often used as a mobile camping shower. Recommended for WaterBob with 1.4 bar pump.When used with WaterBob, only switch on the pump when the shower valve is open.Scope of delivery: 1shower head, 9-way adjustable 1hose, 1.50 metres 2hose connectionsMaterial: plastic, protect from heat above 60°.Item number: CS2801

Rollable waste water tank with large openings Large waste water tank, 35 litres, black.Made of HD polyethylene, with 3 openings. Large wheels make it easy to transport 35 litres of water even on unpaved roads. Only 175 mm high, so it also fits under flat motorhomes.Dimensions:Capacity: 35 litresWidth/mm: 380 mmLength/mm: 850 mmHeight/mm: 175 mmWeight: 2.8 KG

WAFA 5for convenient filling of fresh water tanks in motorhomes with the aid of familiar quick coupling systems for 1/2 inch hoses. Suitable for water tanks with and without overflow. Screw cap with fine thread or Gob thread suitable for: Knaus, Weinsberg, etc.Application:To fill the water tank, simply replace the original screw cap with the WAFA .When fitting, ensure a straight fit on the thread and do not tilt (tank thread can be damaged if screwed on forcibly). The threaded ring and connection insert can be turned separately.Inlet opening facing upwards, overflow facing downwards.Attach the short hose supplied to the overflow opening of the WAFA. It is used for pressure equalisation and secures the overflow.Scope of delivery: 1 WAFA water filling adapter, 1 hose for insertion and safety overflow, 1 O-ring (fitted). Cover Ø 60 mm (hose coupling shown is not included in the scope of delivery).Material:Adapter: PET, UV-resistant and suitable for foodstuffs (drinking water). Recyclable plastic.Additional hose: UV-resistant and food-safe. Inner seal: TPURegulation (EU) No. 10/2011 of the European Commission on plastic materials and articles intended to come into contact with food (Europe). Approved by the (FDA) Food and Drug Aministration (USA).Slight colour deviations from illustration possible.Safety note:WAFA filling adapterdoes not switch off automatically when the water tank is full. Do not carry out the filling process unattended. If water overflows from the pressure openings, switch off the water. Do not close the pressure openings. Close the inspection cover on the inside of the water tank (red) tightly before filling.The filling adapter is only to be used for drinking water.

ClingCup – the ultimate holder with the patented Clingfish Effect® for uneven surfaces, films and hammered finishes. The ClingCup was developed by ClingTech Bionics UG, Hennef, for reversible yet strong attachment to rough, textured and uneven surfaces. For caravans with hammered finishes, we have developed a special adapter for the ClingCup – this allows our CamperFilters to be attached securely. Scope of delivery 2-piece suction holder:1. Consisting of ClingCup suction holder 2. Special adapter for inserting CamperFilter cartridges.Fully assembled for immediate use.

WAFA 2 Water filling adapter, water tank cap for motorhomes Giottiline, PLA.For convenient filling of fresh water tanks in motorhomes, using known quick coupling systems (Gardena, etc.) for 1/2 inch hoses. Suitable for water tanks with and without overflow.Screw cap suitable for: Giottiline and PLA. ATTENTION: Newer models have different fuel caps.Please note photo as a sample for original tank cap: Lid Ø 60 mm, screw thread Ø 45 mmOR CONTACT US, WE WILL BE HAPPY TO HELP YOU.Scope of delivery: 1WAFA water filling adapter, 1 hose for insertion into the water filler neck, 1 original Gardena O-ring (fitted). The hose coupling shown is not included in the scope of delivery.In-house development and production.With short horizontal inlet channels, turbulence can occur when filling with high water pressure, which flushes the water out to the pressure openings. In this case, attach the short hose supplied to the outlet channel of the WAFA and insert it into the tank. The pressure opening on the WAFA enables pressure equalisation for water tanks without overflow.Material:Adapter: PET, UV-resistant and suitable for foodstuffs (drinking water). Recyclable plastic. Additional hose: UV-resistant and food-safe. Inner seal: TPU Regulation (EU) No. 10/2011 of the European Commission on plastic materials and articles intended to come into contact with food (Europe). Approval of the (FDA) Food and Drug Aministration (USA).Safety note:WAFA filling adapter does not switch off automatically when the water tank is full. Do not carry out the filling process unattended. If water overflows from the pressure openings, switch off the water. Do not close the pressure openings. Close the inspection cover on the inside of the water tank (red) tightly before filling. The WAFA filling adapter is only to be used for drinking water. Protect from heat above 60°. Not suitable for dishwasher. Do not place in hot areas (heating pipe outlet, etc.).

WiperSocks, Universalgröße, Schutzhülle für Scheibenwischer aus:Strapazierfähiger LKW Plane (PVC)Schützt bei längeren Standzeiten von Fahrzeugen die Scheibenwischer und Windschutzscheibe vor:Anfrieren bei FrostVersprödung durch UV-StrahlungVerkratzen und Schlierenbildung auf der Windschutzscheibe durch SchmutzablagerungWiperSocks einfach von oben über den gesamten Scheibenwischerarm ziehen und auf der Windschutzscheibe ablegen.Universalgröße für alle Transporter und Wohnmobile auf Transporterbasis und Vollintegrierte Liner, Teilintegrierte, Alkoven-Fahrzeuge.Länge innen: 790 mm, Breite an Öffnung: 140 mmFarbe: AnthrazitEigene Entwicklung, hergestellt in Deutschland.Material: PVCLieferumfang: 1 Satz = 2 Stück für linken und rechten Scheibenwischer

Digital water meter with two-line LCD display. Mist flow rate continuous and with intermediate measurement.Connection option for CamperFilter with quick-release hose coupling on both sides.Note on the accuracy of our water meters:Our water meters are precise and reliable, but there may still be system-related deviations. This can be caused, for example, by air in the pipe system, fluctuating water pressure, unfavourable installation positions or minimal leaks. Under normal conditions, the deviation is typically less than 10 %. The values displayed therefore serve as a guide and do not replace a calibrated consumption measurement.