Skip to main content
Free shipping for orders over €40
Satisfaction guarantee
From campers for campers
Secure shopping with SSL
+49 (0) 6152 807300 Mon-Fri from 9:00 to 17:00

WAFA 6 Water tank adapter for WOHNWAGEN water tank Knaus, Weinsberg

Product information "WAFA 6 Water tank adapter for WOHNWAGEN water tank Knaus, Weinsberg"

WAFA+ 6 for WOHNWAGEN, 50 mm tank opening.
WAFA+6 is a filling adapter and tank cap in one and replaces the original tank cap on the fresh water tank of Knaus and Weinsberg camper vans with a 50 mm diameter filler neck.
Please note the size of the original filler cap when ordering. For motorhomes (60 mm) we offer the WAFA+ 7.
For convenient filling of fresh water tanks in caravans, with the aid of known hose coupling systems for 1/2" inch hoses (Gardena, etc.).

Application:

Unscrew the original tank cap
Place the ring of the dust protection cap around the threaded connection on the tank
Screw on the WAFA+ (note: do not screw in the tank thread at an angle)
Place the hose with hose coupling (Gardena, etc.) on the brass coupling and screw in the
water.) onto the brass coupling and fill the water tank
Pull off the hose coupling and leave the WAFA+ on the tank as a cap
Put on the dust cap,
Close the service flap, finished


After filling, the built-in valve closes the return flow from the tank and seals the tank cap. This prevents water from escaping from the water tank. The dust cap supplied prevents dirt from entering the WAFA+.
Scope of delivery:
1 WAFA+ water tank lid with adapter (for Gardena, etc.) and integrated return stop, 1 dust cap, 1 O-ring (fitted). (The hose coupling (Gardena) shown is not included in the scope of delivery).
Safety instructions:
Only use when the overflow or tank venting system is functioning. WAFA+ filling adapter does not switch off automatically when the water tank is full. Do not carry out the filling process unattended. Switch off the water at the latest when the tank vent overflows. Close the inspection cover of the water tank tightly before filling.
The WAFA+ filling adapter is only to be used for drinking water. In-house development, manufactured in Europe (Germany).
Material:
Adapter: PLA, compostable plastic (EU standard 13432). Silicone seal, Gardena rubber ring, brass pin, stainless steel spring, dust cap Protect from heat above 50°, do not use boiling water or dishwasher. Do not place on heating pipes or behind windows in direct sunlight. Slight variations in colour or surface structure possible, no impairment of function, additive manufacturing.

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.