WAFA water tank adapter - Clean water. Clean solution.
With the clever WAFA water tank adapters, filling your fresh water tank is easier and more hygienic than ever before!
Simply click on the water hose with Gardena connection - and the water starts running. No dripping, no awkward constructions, no compromises.
✅ Convenient: Quickly connected, ready to go
✅ Hygienic: No contact between hose and tank opening
✅ Perfect fit: Available for almost every motorhome & caravan
✅ Made by CamperStation: Sophisticated, durable, safe
Find the right adapter for your vehicle now and enjoy clean water - without stress.
WAFA - Tank adapter
Where do you put the water hose after use? It usually ends up in the tool shed, cellar, garage or motorhome. Dirt and insects get in and the hose needs to be rinsed before it can be used again. Hose adapters or hose couplings also need to be rinsed thoroughly to ensure they remain tight.The HoseCap puts an end to this. To use the HoseCap, simply push the hose through the hose eyelet so that it does not get lost. After using the water hose, attach the HoseCap to the hose coupling. This keeps the water hose closed and clean inside. The HoseCap is available in a 3-pack, orange.Package contents: 3 HoseCaps.Set price 3 pieces HoseCap € 9.90The hose coupling shown is not included in the scope of delivery.Material PET, UV-resistant, food-safe (drinking water), recyclable plastic, protect from heat above 60°C, do not treat with boiling water. Slight variations in colour or surface structure possible, no impairment of function.
MultiShower with hose and 2 hose connections. On/off switch with lock.Adjustment of the spray intensity.9-way adjustable spray jet.adjustable spray jet.Connection suitable for WaterBob and is therefore often used as a mobile camping shower.When used with WaterBob, only switch on the pump when the shower valve is open.Scope of delivery:1 shower head,1 hose,2 hose connectionsMaterial: plastic, protect from heat above 60°.Item number: CS2801
WAFA 2 Water filling adapter, water tank cap for motorhomes Giottiline, PLA.For convenient filling of fresh water tanks in motorhomes, using known quick coupling systems (Gardena, etc.) for 1/2 inch hoses. Suitable for water tanks with and without overflow.Screw cap suitable for: Giottiline and PLA.Please note photo as a sample for original tank cap: Lid Ø 60 mm, screw thread Ø 45 mmOR CONTACT US, WE WILL BE HAPPY TO HELP YOU.Scope of delivery: 1WAFA water filling adapter, 1 hose for insertion into the water filler neck, 1 original Gardena O-ring (fitted). The hose coupling shown is not included in the scope of delivery.In-house development and production.With short horizontal inlet channels, turbulence can occur when filling with high water pressure, which flushes the water out to the pressure openings. In this case, attach the short hose supplied to the outlet channel of the WAFA and insert it into the tank. The pressure opening on the WAFA enables pressure equalisation for water tanks without overflow.Material:Adapter: PET, UV-resistant and suitable for foodstuffs (drinking water). Recyclable plastic. Additional hose: UV-resistant and food-safe. Inner seal: TPU Regulation (EU) No. 10/2011 of the European Commission on plastic materials and articles intended to come into contact with food (Europe). Approval of the (FDA) Food and Drug Aministration (USA).Safety note:WAFA filling adapter does not switch off automatically when the water tank is full. Do not carry out the filling process unattended. If water overflows from the pressure openings, switch off the water. Do not close the pressure openings. Close the inspection cover on the inside of the water tank (red) tightly before filling. The WAFA filling adapter is only to be used for drinking water. Protect from heat above 60°. Not suitable for dishwasher. Do not place in hot areas (heating pipe outlet, etc.).
WAFA 3, water tank adapter, with 3-pin bayonet connectionFor convenient filling of fresh water tanks in motorhomes, using familiar quick coupling systems for 1/2 inch hoses (Gardena, etc.). Suitable for water tanks with and without overflow. Bayonet fitting with 3 spigots suitable for 68 mm lid diameter or tank filler openings with 55 mm diameter (see photos).Mostly used for panel van motorhomes, alcoves, semi-integrated, integrated and liners from all common manufacturers.Please compare the original tank opening shown with the number of pins and diameter before ordering. OR CONTACT US, WE WILL BE HAPPY TO HELP YOU. THERE ARE TWO SIZES.We stock the WAFA 3-Pinin 68 and 78 mm lid diameters.Tighten the adapter slightly with a short turn to the right.With short horizontal inlet channels, turbulence can occur when filling with high water pressure, which flushes the water out to the pressure openings. In this case, attach the short hose supplied to the outlet channel of the WAFA and insert it into the tank. The pressure openings on the WAFA enable pressure equalisation for water tanks without overflow. When the water tank is full, excess water runs out of the openings.In-house development, manufactured in Germany.Material:Adapter: PET, UV-resistant and suitable for foodstuffs (drinking water). Recyclable plastic. Additional hose: UV-resistant and food-safe. Seals: PET.Protect from heat above 60°C, do not treat with hot water. Slight deviations in colour or surface structure possible, no impairment of function, additive manufacturing.Regulation (EU) No. 10/2011 of the European Commission on plastic materials and articles intended to come into contact with food (Europe). Approval by the (FDA) Food and Drug Aministration (USA)Scope of delivery:1 WAFA water filling adapter, 1 hose for insertion into the water filler neck, 1 original Gardena O-ring (fitted). Opening inside Ø 55 mm, 1spacer ring seal (hose coupling shown is not included in the scope of delivery, 2 spacer ring seals only for WAFA3A for 78 mm lid diameter).
Zum bequemen Befüllen von Frischwassertanks in Wohnmobilen, mit Hilfe bekannter Schnellkupplungssysteme für 1/2 Zoll Schläuche. Geeignet für Wassertanks mit und ohne Überlauf. Bajonettverschluss mit 2 Zapfen passend für: Mobilvetta, Challenger, Roller-Team, Benimar, Forster, Hymer, Laika u.v.a.Eigene Entwicklung und Produktion in Deutschland.
Lieferumfang:1 WAFA-Wasserfülladapter, 1 Schlauch zur Einführung in den Wasser-Einfüllstutzen, 1 original Gardena-O-Ring (montiert). Deckel Ø 39 mm (oben abgebildete Schlauchkupplung ist nicht im Lieferumfang).
Bei kurzen horizontalen Einlasskanälen kann es beim Befüllen mit hohem Wasserdruck zu Verwirbelungen kommen, die das Wasser zu den Drucköffnungen heraus spült. In diesem Fall den mitgelieferten kurzen Schlauch auf den Auslasskanal des WAFA stecken und in den Tank einführen. Die Drucköffnungen am WAFA ermöglichen den Druckausgleich bei Wassertanks ohne Überlauf. Wenn der Wassertank voll ist, läuft überschüssiges Wasser aus den Öffnungen.
Bei kurzen horizontalen Einlasskanälen kann es beim Befüllen mit hohem Wasserdruck zu Verwirbelungen kommen, die das Wasser zu den Drucköffnungen heraus spült. In diesem Fall den mitgelieferten kurzen Schlauch auf den Auslasskanal des WAFA stecken und in den Tank einführen. Die Drucköffnungen am WAFA ermöglichen den Druckausgleich bei Wassertanks ohne Überlauf. Wenn der Wassertank voll ist, läuft überschüssiges Wasser aus den Öffnungen.
Sicherheitshinweis:WAFA-Fülladapter schaltet nicht automatisch ab, wenn der Wassertank voll ist. Den Befüllvorgang nicht unbeaufsichtigt vornehmen. Bei Überlauf aus den Drucköffnungen, Wasser abstellen. Drucköffnungen nicht verschließen. Revisionsdeckel des Wassertanks innen (rot), vor dem Befüllen fest verschließen. Der Fülladapter ist nur für Trinkwasser zu verwenden.
WAFA 5for convenient filling of fresh water tanks in motorhomes with the aid of familiar quick coupling systems for 1/2 inch hoses. Suitable for water tanks with and without overflow. Screw cap with fine thread or Gob thread suitable for: Knaus, Weinsberg, etc.Application:To fill the water tank, simply replace the original screw cap with the WAFA .When fitting, ensure a straight fit on the thread and do not tilt (tank thread can be damaged if screwed on forcibly). The threaded ring and connection insert can be turned separately.Inlet opening facing upwards, overflow facing downwards.Attach the short hose supplied to the overflow opening of the WAFA. It is used for pressure equalisation and secures the overflow.Scope of delivery: 1 WAFA water filling adapter, 1 hose for insertion and safety overflow, 1 O-ring (fitted). Cover Ø 60 mm (hose coupling shown is not included in the scope of delivery).Material:Adapter: PET, UV-resistant and suitable for foodstuffs (drinking water). Recyclable plastic.Additional hose: UV-resistant and food-safe. Inner seal: TPURegulation (EU) No. 10/2011 of the European Commission on plastic materials and articles intended to come into contact with food (Europe). Approved by the (FDA) Food and Drug Aministration (USA).Slight colour deviations from illustration possible.Safety note:WAFA filling adapterdoes not switch off automatically when the water tank is full. Do not carry out the filling process unattended. If water overflows from the pressure openings, switch off the water. Do not close the pressure openings. Close the inspection cover on the inside of the water tank (red) tightly before filling.The filling adapter is only to be used for drinking water.
WAFA+ 6 for WOHNWAGEN, 50 mm tank opening.WAFA+6 is a filling adapter and tank cap in one and replaces the original tank cap on the fresh water tank of Knaus and Weinsberg camper vans with a 50 mm diameter filler neck.Please note the size of the original filler cap when ordering. For motorhomes (60 mm) we offer the WAFA+ 7.For convenient filling of fresh water tanks in caravans, with the aid of known hose coupling systems for 1/2" inch hoses (Gardena, etc.). Application: Unscrew the original tank capPlace the ring of the dust protection cap around the threaded connection on the tankScrew on the WAFA+ (note: do not screw in the tank thread at an angle)Place the hose with hose coupling (Gardena, etc.) on the brass coupling and screw in the water.) onto the brass coupling and fill the water tankPull off the hose coupling and leave the WAFA+ on the tank as a capPut on the dust cap,Close the service flap, finishedAfter filling, the built-in valve closes the return flow from the tank and seals the tank cap. This prevents water from escaping from the water tank. The dust cap supplied prevents dirt from entering the WAFA+.Scope of delivery:1 WAFA+ water tank lid with adapter (for Gardena, etc.) and integrated return stop, 1 dust cap, 1 O-ring (fitted).
(The hose coupling (Gardena) shown is not included in the scope of delivery).Safety instructions:Only use when the overflow or tank venting system is functioning. WAFA+ filling adapter does not switch off automatically when the water tank is full. Do not carry out the filling process unattended. Switch off the water at the latest when the tank vent overflows. Close the inspection cover of the water tank tightly before filling.The WAFA+ filling adapter is only to be used for drinking water. In-house development, manufactured in Europe (Germany).Material: Adapter: PLA, compostable plastic (EU standard 13432). Silicone seal, Gardena rubber ring, brass pin, stainless steel spring, dust cap Protect from heat above 50°, do not use boiling water or dishwasher. Do not place on heating pipes or behind windows in direct sunlight. Slight variations in colour or surface structure possible, no impairment of function, additive manufacturing.
WAFA+ Water filling adapter & tank capWAFA+ is a filling adapter and tank cap in one and replaces the original tank cap on the fresh water tank.The service flap can be closed effortlessly. For convenient filling of fresh water tanks in motorhomes with the aid of familiar quick coupling systems for 1/2 inch hoses. Suitable for water tanks with functioning ventilation and overflow.Screw cap with either coarsethread or fine thread suitable for: Knaus, Weinsberg, Bürstner, Chausson, Challenger, Ahorn SlimPlease check the thread type before ordering or send a photo of the fuel filler cap.A smaller WAFA is required for caravans, this is also available from us.OR ASK US, WE WILL BE HAPPY TO HELP YOU.How it works:The built-in valve closes the return flow from the tank after filling and seals the tank cap. This prevents water from escaping from the water tank. The dust cap supplied prevents dirt from entering the WAFA+ Application:1. unscrew the original tank cap2. place the ring of the dust cap around the threaded connection on the tank3. screw on the WAFA+ (Caution: do not screw in the tank thread at an angle)4. attach the hose with hose coupling (Gardena, etc.) and fill the water tank5. pull off the hose coupling and leave the WAFA+ on the tank as a cap6. put on the dust protection cap7. close the flap, ready (fits every service flap)8. everything stays clean and dry! Safety note:Only use with an existing and functioning overflow/fuelling vent.WAFA+ filling adapter does not switch off automatically when the water tank is full. Do not carry out the filling process unattended. Switch off the water at the latest when the tank vent overflows. Close the inspection cover of the water tank (red) tightly before filling. The WAFA+ filling adapter is only to be used for drinking water.In-house development, manufactured in Germany. Scope of delivery:1 c-water tank cap with adapter (for Gardena, etc.) and integrated backflow stop,1 dust protection cap, 1 original Gardena O-ring (fitted). (Hose coupling shown is not included in the scope of delivery).Material:Adapter: PET, UV-resistant and suitable for foodstuffs (drinking water). Recyclable plastic.Silicone seal food-safe, Gardena rubber ring, brass pin, stainless steel spring, dust capProtect from heat above 60°. Not suitable for dishwasher. Do not place in hot areas (heating pipe outlet etc.).Regulation (EU) No. 10/2011 of the European Commission on plastic materials and articles intended to come into contact with food (Europe). Approval of the (FDA) Food and Drug Aministration (USA).Slight colour deviations from illustration possible.
WAFA+ Water filling adapter & tank cap NEW - Now with brass adapterWAFA+ is a filling adapter and tank cap in one and replaces the original tank cap on the fresh water tank. For convenient filling of fresh water tanks in motorhomes, using familiar quick coupling systems for 1/2 inch hoses. Suitable for water tanks with a functioning overflow.Screw cap with Coarsethread Suitable for: Chausson, Challenger, Ahorn Slim How it works:The built-in valve closes the return flow from the tank after filling and seals the tank lid. This prevents water from escaping from the water tank. The dust cap supplied prevents dirt from entering the WAFA+ Application:1. unscrew the original tank cap2. place the ring of the dust cap around the threaded connection on the tank3. screw on the WAFA+ (caution: do not screw in the tank thread at an angle)4. attach the hose with hose coupling (Gardena, etc.) and fill the water tank5. pull off the hose coupling and leave the WAFA+ on the tank as a cap6. put on the dust protection cap, swivel in the filler neck - done!7. Everything stays clean and dry! Safety instructions:Only use with an existing and functioning overflow/fuelling vent.WAFA+ filling adapter does not switch off automatically when the water tank is full. Do not carry out the filling process unattended. Switch off the water at the latest when the tank vent overflows. Close the inspection cover of the water tank (red) tightly before filling. The WAFA+ filling adapter is only to be used for drinking water.In-house development, manufactured in Germany.Scope of delivery:1 water tank lid with adapter (for Gardena, etc.) and integrated backflow stop,1 dust protection cap, 1 original Gardena O-ring (fitted).(Hose coupling shown is not included in the scope of delivery).Material:Adapter: PET, UV-resistant and suitable for foodstuffs (drinking water). Recyclable plastic.Silicone seal food-safe, Gardena rubber ring, brass pin, stainless steel spring, dust capProtect from heat above 60°. Not suitable for dishwasher. Do not place in hot areas (heating pipe outlet etc.).Regulation (EU) No. 10/2011 of the European Commission on plastic materials and articles intended to come into contact with food (Europe). Approval of the (FDA) Food and Drug Aministration (USA).Slight colour deviations from illustration possible.